Brother International XS3109 Operation Manual - Page 69
Turn on the sewing machine, and then select
View all Brother International XS3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Hold the quilting foot in place with your right c hand, and then tighten the presser foot holder screw using the disc-shaped screwdriver in your left hand. Use both hands to hold the fabric taut, then f move the fabric to follow the pattern. Reinforcement stitches are sewn at the beginning and end of sewing. a Presser foot holder screw CAUTION ● Be sure to securely tighten the screws with the disc-shaped screwdriver, otherwise the needle may touch the presser foot, causing it a Pattern After sewing is finished, slide the feed dog 3 g position lever to (to the left as seen from the front of the machine) and turn the handwheel to raise the dogs. to bend or break. • Normally, the feed dog position lever is Slide the feed dog position lever, located at the d rear of the machine on the base, to (to positioned at . the right as seen from the front of the machine). a Feed dog position lever (as seen from the rear of the machine) X The feed dogs are lowered. Turn on the sewing machine, and then select a e stitch. 67