Brother International XS3109 Operation Manual - Page 29
thread take-up lever from right to left
View all Brother International XS3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Memo Feed the upper thread as shown in the j illustration below. ● When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool. 1 cb a a Spool cap (small) b Spool (cross-wound thread) c Space While holding the spool with your right hand, h and then pass the thread under the thread guide. Make sure you guide the thread through the k thread take-up lever from right to left as shown in the illustration below. a Thread guide Pass the thread under the thread guide cover i from the back to the front. Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand. a Thread take-up lever Memo ● If the needle is not raised, the thread takeup lever cannot be threaded. Be sure to press the needle position button to raise the needle before threading the thread take-up lever. a Thread guide cover 27