Canon 2455B002 User Manual - Page 16
Turning the Power ON, Scanner Recognition
View all Canon 2455B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Contents Back Previous Page Next Page 3 Connect the plug of the AC adapter to the power connector on the back of the scanner. 33..TTuurnrinnigntghethPeowPeorwOeNr ON When you turn the computer and the scanner ON for the first time, the Plug and Play function of Windows recognizes the scanner and automatically installs the required device driver. 4 Use the supplied USB cable to connect the scanner to the computer. IMPORTANT • If you turn the power OFF, wait at least 10 seconds before turning it ON again. • If you will not be using the scanner for an extended period, you should disconnect the power cord from the AC outlet for safety. Scanner Recognition The scanner will be recognized the first time it is connected to the computer. 1 Make sure that the scanner and computer are connected properly. 2 Press the power switch on the back of the scanner to turn the scanner ON (I side). 16 DR-2010C / DR-2510C