Canon 2455B002 User Manual - Page 66
Attaching the Feeding Roller, Insert the feeding roller into the slot inside the roller cover
View all Canon 2455B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3 Open the roller cover on the main unit by placing your fingers in the grooves and pulling it down. Contents Back Previous Page Next Page Attaching the Feeding Roller 1 Insert the feeding roller into the slot inside the roller cover, and align the notch on the roller with the shaft on the main unit. 4 Lift up the roller fixing lever (c), and slide it to the left (d). 2 Slide the roller fixing lever to the right to lock the roller into the hole on the left of the feeding roller. 5 Remove the feeding roller by moving it to the left to detach it from its shaft, and pull it out of the slot. 3 Push down the lever to lock the shaft of the feeding roller into place. 66 DR-2010C / DR-2510C
Back
Previous Page
Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
66
3
Open the roller cover on the main unit by placing your fingers in the
grooves and pulling it down.
4
Lift up the roller fixing lever (
c
), and slide it to the left (
d
).
5
Remove the feeding roller by moving it to the left to detach it from its shaft,
and pull it out of the slot.
Attaching the Feeding Roller
1
Insert the feeding roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the main unit.
2
Slide the roller fixing lever to the right to lock the roller into the hole on the
left of the feeding roller.
3
Push down the lever to lock the shaft of the feeding roller into place.