Canon 3622B002 User Manual - Page 100
Option Specifications, Barcode Specifications
View all Canon 3622B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Chapter 7 Appendix 2. Option Specifications This section contains the specifications for the separately sold Barcode Module (p. 7-3) and imprinters. Refer to "Using Patchcode Sheets (Option)" (p. 3-20) for the specifications of the patchcodes that can be detected by the patchcode decoder. Barcode Specifications The following barcodes can be read by installing the optional barcode module. ■ Barcode Types Code No. of Digits Checksum EAN Codabar Code 39 ITF Code 128 UPC-A UPC-E 8 or 13 Modulus 10, Weight 3 3 to 32 (including Modulus 16, 7 DR Start/Stop characters) 3 to 32 (including Modulus 43 Start/Stop characters) (Standard ASCII or Full ASCII) 2 to 32 (Even number. of digits only) Modulus 10, Weight 3 1 to 32 (Valid data Modulus 103 only) 13 Modulus 10, Weight 3 8 Modulus 10, Weight 3 Note: EAN, UPC-A and UPC-E add-ons supported ■ Detection Conditions Item Condition Printed Side Front or back (or both, but at reduced speed) Orientation Perpendicular (0 degrees) or parallel (90 degrees) to the feeding direction Size Slew Element Ratio PCS Value Feeding Direction 0 degrees 90 degrees Reading direction should be specified beforehand Note: Speed is slow when both directions are specified. Line Width 0.012" to 0.039" (0.3 to 1 mm) When module width exceeds 0.021" (0.508 mm), Code 128, UPC-A, UPC-E and EAN detect incorrectly Code Width 4.134" (105 mm) or less (including quiet zone) Bar Height At least 0.393" (10 mm) Margins At least one character at each end Within ±3º 2.2 to 3.0 At least 0.60 (with a white point of at least 75% reflectance) 7-5