Canon 3950B002 User Manual - Page 104
Attaching the Retard Roller, Insert the retard roller into the slot inside the roller cover
View all Canon 3950B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
3 Grasp the ends of the roller cover inside the front unit and pull it down to open it. Contents Back Previous Page Next Page Attaching the Retard Roller 1 Insert the retard roller into the slot inside the roller cover, and align the notch on the roller with the shaft on the front unit. 4 Lift up the roller fixing lever (c), and slide it to the right (d). 2 Slide the roller fixing lever to the left to lock the roller into the hole on the left of the retard roller. 5 Remove the retard roller by moving it to the right to detach it from its shaft, and pull it out. 3 Push down the lever to lock the shaft of the feeding roller into place. 104
Back
Previous Page
Next Page
Contents
104
3
Grasp the ends of the roller cover inside the front unit and pull it down to
open it.
4
Lift up the roller fixing lever (
), and slide it to the right (
).
5
Remove the retard roller by moving it to the right to detach it from its shaft,
and pull it out.
Attaching the Retard Roller
1
Insert the retard roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the front unit.
2
Slide the roller fixing lever to the left to lock the roller into the hole on the
left of the retard roller.
3
Push down the lever to lock the shaft of the feeding roller into place.