Canon 3950B002 User Manual - Page 95
Maintenance, 1. Regular Maintenance, Cleaning the Scanner
View all Canon 3950B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 Maintenance Contents Back Previous Page Next Page 1. Regular Maintenance Clean the scanner on a regular basis, as described below, to maintain peak scanning quality. 1. Regular Maintenance 95 Cleaning the Scanner 95 Cleaning the Inside of the Scanner 95 Cleaning the Sensor Glass and the Rollers 96 2. Removing and Attaching the Rollers and Document Holding Guide ........ 98 Roller Replacement Cycle 98 Resetting the Counter 98 Removing/Attaching the Feeding Roller 101 Removing/Attaching the Retard Roller 103 Removing/Attaching the Document Holding Guide 105 CAUTION • When cleaning the scanner and the inside of the scanner, turn OFF the power switch and disconnect the power cord from the power outlet. • Do not use spray cleaners to clean the scanner. Precision mechanisms, such as the light source, may get wet, and cause a malfunction. • Never use paint thinner, alcohol, or other organic solvents to clean the scanner. Such solvents can damage or discolor the exterior of the scanner, or create a risk of fire or electrical shock. Cleaning the Scanner To clean the exterior of the scanner, dampen a cloth with water or a mild detergent, wring the cloth out thoroughly, and then wipe the dirt away. Then use a dry, soft cloth to wipe away any moisture. Cleaning the Inside of the Scanner Dust or paper particles inside the scanner may cause lines or smudges to appear on scanned images. Use compressed air to periodically clean dust and paper particles from the document feed opening and the inside of the scanner. After finishing a large scanning job, turn OFF the scanner and then clean out any paper particles remaining inside the scanner. 95