Canon 8 x 20 IS 8x20 IS 10x20 IS Instructions - Page 13

Troubleshooting If there is a problem with the binoculars, first refer to the table below to see if you can resolve it. If the problem cannot be resolved, contact your dealer or nearest Canon Service Center. Problem Probable Cause Corrective Measures The image is not clear. The lens is dirty. Use a blower brush to remove dust, etc., from the lens surface. Then use a soft, dry cloth to wipe the lens gently. The diopter has not been Adjust the diopter. properly set. (See step 3 on page 9) The width of the binoculars Adjust the width of the does not suit the width binoculars. between your eyes. (See step 2 on page 9) The binoculars are not properly focused. Focus the binoculars. (See step 4 on page 9) The Image Stabilizer There are no batteries does not operate. loaded. Load batteries having enough power. (See page 7 "Loading the Batteries") When the Image Stabilizer button is pressed, the lamp does not light. If the lamp does not light, it means the batteries are exhausted. Replace the batteries with new ones. (See page 7 "Loading the Batteries") ENG-12