Canon Color imageCLASS LBP712Cdn imageCLASS LBP712Cdn Getting Starte - Page 9

Connecting the Power Cord and Turning ON the Power 2 1 Selecting the Method to Connect the Machine ●● Connecting via a Wired LAN You can connect the machine to a wired router. Use the LAN cables to connect the machine to the wired router (access point). Connect the computer to the router by cable or wirelessly. Make sure that there is an available port in the router to connect the machine and the computer. Have a LAN Cable of Category 5 or higher twisted-pair cable ready. ●● Connecting via a USB cable You can connect the machine to the computer using a USB cable. Do not connect the USB cable at this time. Connect it when installing software. Specifying the Initial Settings The first time you turn ON the power, follow the instructions on the screen. For details on navigating the menu and how to input the numbers, see "Navigating the Menu and Text Input Method" on p. 8. ●● Complete settings starting with language and through to USB-Connected PC OS Follow the instructions on the screen, set the language, USB-Connected PC OS, and date and time. Language English Čeština Dansk Deutsch USB-Connected PC OS Mac OS Windows Other Make sure that the USB cable you use has the following mark. Connecting via a Wired LAN Checking before the Setup Internet Router or hub LAN cable Are the computer and the router (or hub) properly connected using a LAN cable? For more information, see the instruction manual for the En network device you are using, or contact the networking device manufacturer. Have the network settings on the computer been completed? If the computer is not properly configured, you may not use the wired LAN connection even after completing the following settings. NOTE • When you connect to a network environment that is not security protected, your personal information could be disclosed to third parties. Please use caution. • If you connect through a LAN in the office, contact your network administrator. 9