Canon Color imageCLASS MF8080Cw imageCLASS MF8080Cw Starter Guide - Page 14
Performing Color Correction
View all Canon Color imageCLASS MF8080Cw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Performing Color Correction Color correction takes approximately 255 seconds. Make sure that paper is loaded, and then press [OK]. Supported Paper: Size: A4, LTR, 16K Type: Plain, Rec OK Check the temperature of the installation site If the room temperature is low, correction may not be performed properly. If appears • Is the paper loaded correctly? →→ Load plain paper or recycled paper of A4/Letter size in the paper cassette. • Is the test chart placed on the platen glass correctly? →→ Place the test chart with the print side face down and the black stripe toward the back of the machine. • Has a paper jam occurred? →→ Remove the jammed paper. If you want to perform color correction again, press [ ] (Menu), and then select the following settings in the following order. →→ → → Confirm the procedure for the color correction, and then press [OK]. Steps (Start:Press OK) 1. Print Adj. Image 2. Scan Adj. Image Step 1 Printing adjustment image... Open the feeder. A test chart (adjustment image) is printed. Place the test chart on the platen glass with the print side face down. Place the paper so that the black stripe is at the back side of the machine. Close the feeder. Press [ ] (Start). Place adjustment image on the glass with black side toward the back. Press Color to start. Step 2 Scanning adjustment image... Remove the test chart (adjustment image) placed on the platen glass in Step . Copy Image Adjustment 14