Canon Color imageCLASS X MF1127C imageCLASS X MF1127C User Guide - Page 19
Step 4, Performing the Color Adjustment, Configuring Automatic Cleaning of the Fixing Assembly
View all Canon Color imageCLASS X MF1127C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting Up ● You cannot register an ID or PIN that consists only of zeros, such as "00" or "0000000." 4 Select . ● If you select , a Remote UI Access PIN is not set, and the Setup Guide proceeds to step 4. 5 Specify the Remote UI Access PIN. ● Enter a PIN, and select . ● The Confirm screen is displayed. Enter the PIN once again to confirm. ● Do not forget your PIN. Step 4 ● You cannot register a PIN that consists only of zeros, such as "00" or "0000000." Performing the Color Adjustment To achieve good copy quality, adjust the gradation. 1 Select . ● If you select , color adjustment is not performed, and the Setup Guide proceeds to step 5. 2 Check that the size and type of paper displayed on the screen is loaded in the machine, and select . 3 Confirm the procedure, and select . ➠ An adjustment image is printed. 4 Open the feeder after the screen displayed during printing is closed. 5 Place the adjustment image on the platen glass. ● Place the adjustment image with the print side facing down and the black stripe toward the back side of the machine. Step 5 6 Gently close the feeder. 7 Select . ➠ Adjustment starts. ● When adjustment is complete, remove the adjustment image from the platen glass. Configuring Automatic Cleaning of the Fixing Assembly 11