Canon EOS 20D EOS 20D Instruction Manual - Page 118

Playback the image.

Page 118 highlights

Preparing to Print wPictBridge ACP Direct SBubble Jet Direct 6 Playback the image. ¡ Press the button. s The image will appear and one of three icons will appear on the upper left to indicate that the camera is connected to the printer. ¡ The procedure will be different depending on the icon displayed. See the applicable pages below. Icon Direct Print Type w PictBridge A CP Direct S Bubble Jet Direct Reference pages 119 - 122 123 - 125 126 - 128 ¡ If you use a battery to power the camera, make sure it is fully charged. During direct printing, keep checking the battery level. ¡ If there is a long beeping sound in step 5, it indicates a problem with the PictBridge printer. To find out what's wrong, do the following: Press the button to playback the image and follow the steps below. 1. Press . 2. On the print setting screen, select [Print]. The error message will be displayed on the LCD monitor. See "Error Messages" on page 122. ¡ Before disconnecting the cable, turn off the camera and printer. Pull out the cable while holding the plug, not the cord. ¡ When connecting the camera to the printer, do not use any cable other than the dedicated interface cable. For direct printing, using AC Adapter Kit ACK-E2 (optional) to power the camera is recommended. 118

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

Preparing to Print
118
6
Playback the image.
¡
Press the <
x
> button.
s
The image will appear and one of
three icons <
w
,
A
,
S
> will appear
on the upper left to indicate that the
camera is connected to the printer.
¡
The procedure will be different
depending on the icon displayed. See
the applicable pages below.
S
Bubble Jet Direct
A
CP Direct
w
PictBridge
Icon
Direct Print Type
Reference
pages
PictBridge
119 - 122
CP Direct
123 - 125
Bubble Jet Direct
126 - 128
w
A
S
¡
If you use a battery to power the camera, make sure it is fully charged.
During direct printing, keep checking the battery level.
¡
If there is a long beeping sound in step 5, it indicates a problem with the
PictBridge printer. To find out what’s wrong, do the following:
Press the <
x
> button to playback the image and follow the steps below.
1. Press <
0
>.
2. On the print setting screen, select [
Print
].
The error message will be displayed on the LCD monitor. See “
Error
Messages
” on page 122.
¡
Before disconnecting the cable, turn off the camera and printer. Pull out
the cable while holding the plug, not the cord.
¡
When connecting the camera to the printer, do not use any cable other
than the dedicated interface cable.
For direct printing, using AC Adapter Kit ACK-E2 (optional) to power the
camera is recommended.