Canon EOS 7D EOS 7D Instruction Manual - Page 111
Using the Built-in Flash
UPC - 013803117493
View all Canon EOS 7D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
D Using the Built-in Flash In the d/s/f/a/F shooting modes, you can press the button to pop-up and fire the built-in flash whenever desired. If the built-in flash has popped up, you can push it back down with your fingers. In the (Full Auto) mode, the built-in flash fires automatically (p.50). In the mode, you can set it to fire automatically or manually (p.53). Using flash in the d/s/f/a/F shooting modes will set the shutter speed and aperture as shown below. In any shooting mode, E-TTL II autoflash control will take effect to suit the manually- or automatically-set aperture. Shooting Mode Shutter Speed Aperture d Automatically set within 1/250 sec. - 1/60 sec. Automatically set s Manually set within 1/250 sec. - 30 sec. Automatically set Automatically set With [8C.Fn I -7: Flash sync. speed in Av mode] (p.207), the following options for f automatic selection can be selected: Set manually • 0: Auto* • 1: 1/250 - 1/60 sec. auto • 2: 1/250 sec. (fixed) a Manually set within 1/250 sec. - 30 sec. Set manually F While you hold down the shutter button, the exposure will continue. Set manually * Normally, the sync speed is set automatically within 1/250 sec. to 30 sec. to suit the ambient brightness. In low light, the main subject is exposed with the automatic flash, and the background is exposed with a slow shutter speed set automatically. Both the subject and background look properly exposed (automatic slow-speed flash sync). With slow shutter speeds, using a tripod is recommended. 111