Canon EOS 7D EOS 7D Instruction Manual - Page 125
A:B C] Multiple slave units in multiple groups, Set [Firing group] to, A:B C]., Set the desired
UPC - 013803117493
View all Canon EOS 7D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Using Wireless FlashN [1 (A:B C)] Multiple slave units in multiple groups C Indoors A Outdoors Approx. 10m (32.8ft.) This is a variant of the [1 (A:B)] setup on the preceding page. This setup has group C Approx. 7m (23.0ft.) eliminate the shadows Approx. B 7m created by groups A and B. (23.0ft.) Refer to your Speedlite's instruction manual to set the 80o Approx. 5m (16.4ft.) slave ID of the three slave units to A (Group A), B (Group B), and C (Group C) and position them as shown in the illustration. 1 Set [Firing group] to [1 (A:B C)]. 2 Set the desired flash ratio and shoot. Select [A:B fire ratio] and set the flash ratio. Set flash exposure compensation for group C as necessary. If [Firing group] is set to [1 (A:B)], group C will not fire. If group C is pointed toward the main subject, overexposure may result. 125