Canon EOS 7D EOS 7D Instruction Manual - Page 121
Set [Channel]., Fire a test flash., Take the picture.
UPC - 013803117493
View all Canon EOS 7D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Using Wireless FlashN 5 Select [Wireless func.]. For [Wireless func.], select [0], then press . X Under [Wireless func.], [Channel], etc., will be displayed. 6 Set [Channel]. Set the channel (1-4) to the same one as the slave unit. 7 Fire a test flash. After checking that the slave unit is ready to fire, go to the screen in step 5 and press the button. X The slave unit will fire. If it does not fire, check your settings again (p.119). 8 Take the picture. Set the camera and take the picture as you would with normal flash shooting. To terminate wireless flash shooting, set [Wireless func.] to [Disable]. Test flash can also be used to wake up slave units from auto power off. Setting [E-TTL II] to [Evaluative] is recommended. If you use only one external Speedlite, the [Firing group] setting does not have any effect. The slave unit is controlled by the built-in flash's light pulse signal. Wireless flash will not work if the [Flash mode] is set to [MULTI flash]. 121