Canon EOS Rebel T1i EOS System Brochure 2010 - Page 19

The Finest Accessories for Your Lenses. To enhance the stellar features of the EF Lens system, there are a number of accessories designed to perform perfectly with your system. Canon offers cases to help protect your lenses, hoods and filters to help control glare, and a number of adapters to further expand the possibilities of your EF Lenses and your EOS System. Close-up Lenses General Purpose Haze (UV-1) Haze (UV-1) Lens Cases The Haze (UV-1) filter absorbs ultraviolet light and is most effective on sunny days for cutting With Close-up Lens haze out of the shot. Type Screw-in Available Sizes 67mm, 72mm, 77mm, 82mm 250D 500D 500 Lens Hoods Lens Cases and Lens Hoods These functional, rugged cases are indispensable to help protect lenses. Lens hoods help prevent unwanted glare from affecting your photographs. Available Sizes See EF Lens Specifications. 52mm Drop-in Screw Filter Holder Drop-in Screw Filter Holder A holder for screw-type filters, for use with rearmounted drop-in filters. Type Drop-in Available Sizes 48mm, 52mm. Includes clear filter. For super-telephoto lenses. Current IS Super-teles-52mm. Previous super-teles without IS-48mm. Close-up Lens 250D/500D/500 The 250D/500D series incorporates double- element achromatic design for maximum optical performance. These screw-in lenses are used to provide a shorter minimum focusing distance with no loss of light. Each lens is optimized for a particular focal length. Manual focus is recom- mended with these lenses. Type Screw-in Available Sizes 500D/500: 52mm, 72mm, 77mm. Optimized for lenses 70 thru 300mm. 250D: 52mm, 58mm. Optimized for lenses 50 thru 135mm. Polarizing Filters Not using Circular PL Filter Not using Circular PL Filter 38 Screw-in 48mm Drop-in Using Circular PL Filter emphasizes the blue of the sky. Using Circular PL Filter suppresses the reflection from the surface of the leaves and the surface of the water. Circular Polarizing Filter PL-CB/PL-C Polarizing filters enhance picture quality by blocking harmful reflected light. Use it to reduce light reflections from glass and water surfaces or to improve color saturation. Simple to use, these filters polarize light circularly, rather than linearly, so they do not interfere with autofocus or TTL light metering. DROP-IN - For use with lenses using rear-mounted drop-in filters, this polarizing filter can be rotated from the outside without removing the holder from the lens, helping enable precise control. Type Screw-in Drop-in Available Sizes 52mm, 58mm, 67mm, 72mm, 77mm, 82mm 48mm, 52mm. For super-telephoto lenses. Current IS Superteles-52mm. Previous super-teles without IS-48mm. EF LENSES Softmat Filters Extension Tubes Gelatin Filter Holders EF 25 II EF 12 II Gelatin Filter Hoods IV Gelatin Filter Holder IV Gelatin Filter Holder Adapter IV Without Softmat Filter Use a Softmat Filter for a soft effect. Softmat No. 1 Softmat No. 2 Softmat No. 1 & No. 2 Softmat filters mildly soften the focus for flattering portraits and dreamy landscapes. These filters utilize the effect of diffraction, which occurs between light passing through the transparent part and light passing through the coated part. Use Softmat No. 1 filter for a gentle soft focus effect, and Softmat No. 2 for a stronger effect. Type Screw-in Available Sizes 52mm, 58mm Extension Tube EF 25 II & EF 12 II These close-up accessories are placed between the camera body and lens to help enable highmagnification photography. Eight electronic contact points allow communication between the camera and lens to continue as usual. The magnification differs according to the lens, but for standard zoom lenses it is about 0.3x to 0.5x for the EF 12 and 0.7x or more for the EF 25. By using both tubes effectively, the choice of magnifications can be greatly extended. However, for best results, manual focusing is recommended. Loupes Loupe 4x Loupe 4x Designed for viewing 35mm film frames at high magnifications, these loupes use a high-performance lens system that help to eliminate all aberration and distortion. They offer diopter adjustment of -4 to +1 dpt, and include an eyecup, hood and case. Gelatin Filter Hoods III Gelatin Filter Gelatin Filter Holder III Holder Adapter III Gelatin Filter Holder System This convenient holder system allows the use of commercially available square filters without the need for cutting. The holder attaches to the lens through an adapter that fits the filter diameter. A special hood is available for use with the system. Use with 3-inch square type III and 4-inch square type IV gelatin filters. Gelatin filters can be used with most EF lenses. Gelatin Filter Holder III & IV Type Available Sizes Screw-in Holder for 3-inch square (III) or 4-inch (IV) gelatin filters. Gelatin Filter Holder Hoods III & IV Type Available Sizes Screw-in Lens shades which attach to holder can be stacked with telephoto lenses. Gelatin Filter Holder Adapter III & IV Type Available Sizes Screw-in III: 52mm, 58mm, 67mm, 72mm, 77mm. IV: 58mm, 67mm, 72mm, 77mm. Drop-in Gelatin Filter Holder II Up to three gelatin filters can be placed in these holders. To use, insert a cut piece of gelatin film between the holder's filter frame and pressure 48mm Drop-in clip, and screw on to the lens. Gelatin Filter Holder II Type Drop-in Available Sizes 48mm, 52mm. For super-telephoto lenses. Current IS Superteles-52mm. Previous super-teles without IS-48mm. Extender EF Specifications EF Lens Attachment EF 135mm f/2L USM EF 180mm f/3.5L Macro USM EF 200mm f/2.8L II USM EF 200mm f/2L IS USM EF 300mm f/2.8L IS USM EF 300mm f/4L IS USM EF 400mm f/2.8L IS USM EF 400mm f/4 DO IS USM EF 400mm f/5.6L USM EF 500mm f/4L IS USM EF 600mm f/4L IS USM EF 800mm f/5.6L IS USM EF 1200mm f/5.6L USM EF 70-200mm f/2.8L USM EF 70-200mm f/4L IS USM / USM EF 100-400mm f/4.5-5.6L IS USM with Extender EF 1.4x II attached Apparent Focal Length (mm) 35mm 189 252 280 280 420 420 560 560 560 700 840 1,120 1,680 98-280 98-280 140-560 APS-H 246 328 364 364 546 546 728 728 728 910 1,092 1,456 2,184 127-364 127-364 182-728 APS-C 302 403 448 448 672 672 896 896 896 1,120 1,344 1,792 2,688 157-448 157-448 224-896 f-stop (f) 2.5-45 4.5-45 2.5-32 2.8-45 4-45 5.6-45 4-45 5.6-45 8-45 5.6-64 5.6-64 8-45 8-45 4-45 5.6-45 6.7-54 Maximum Magnification 0.27 1.4 0.22 0.18 0.15 0.33 0.22 0.17 0.18 0.17 0.17 0.2 0.12 0.22 0.29 0.28 AF *2 *3 *5 *3*4 with Extender EF 2x II attached Apparent Focal Length (mm) 35mm 270 360 400 400 600 600 800 800 800 1,000 1,200 1,600 2,400 140-400 140-400 200-800 APS-H 351 468 520 520 780 780 1,040 1,040 1,040 1,300 1,560 2,080 3,120 182-520 182-520 260-1,120 APS-C 432 576 640 640 960 960 1,280 1,280 1,280 1,600 1,920 2,560 3,840 224-640 224-640 320-1,280 f-stop (f) 4-64 6.7-64 5.6-64 4-64 5.6-64 8-64 5.6-64 8-64 11-64 8-90 8-90 11-64 11-64 5.6-64 8-64 9.5-76 Maximum Magnification 0.38 2.00 0.32 0.24 0.28 0.47 0.31 0.24 0.27 0.27 0.27 0.28 0.27 0.44 0.42 0.40 AF *5 *3*4 *3*4 *3*4 *3*4 *5 *3 *4 For Best Results with your Canon EOS Camera Use Original Canon EF Lenses. Each EOS camera body and each EF Lens has its own built-in microcomputer. These microcomputers store a range of special data to ensure the smooth operation of bodies and EF lenses which support two-way digital communications between each part to allow exchange of information. Since the EOS System's market launch in 1987, functions have been added and improved on a continuing basis, such as Optical Image Stabilizer to some lenses, speeding up the AF function, increasing the number of focusing points, and the addition of the Eye Controlled Focus™ Function. As the system's range of functions has evolved, the nature of the basic system of communications between lens and body has evolved as well, ensuring that complete compatibility is maintained. This process of evolution will continue in the future with the addition of more new specifications, resulting in still further gains in reliability. Accordingly, in order to realize the maximum performance of the EOS System and thereby achieve among the highest possible photographic quality, we recommend that you use Canon EF lenses and Canon brand accessories, since they are designed and manufactured to match the special qualities of your EOS camera. *1 If the lens is attached to an EOS camera, having multiple focusing points and an Extender is attached to the lens, only the center focusing point will be useable for AF. *2 The autofocusing range is from 2.6 feet/0.8m to infinity. *3 With the EOS-1Ds Mark III, EOS-1Ds Mark II, EOS-1D Mark III, EOS-1D Mark II, EOS-1Ds, EOS-1D, EOS-1v and EOS-3, AF is possible with the center focusing point only. *4 The Image Stabilizer does not operate with the following cameras: EOS650, 630, 620, 600, RT, 700, 750, 850, EOS-1, A2, A2E, 10s, ELAN, Rebel, Rebel S, Rebel II and Rebel SII. *5 With the EOS-1Ds Mark II, EOS-1Ds, EOS-1D Mark II N, EOS-1D Mark II, EOS-1D, EOS-1v, EOS -1v HS and EOS-3, AF is possible with the center focusing point only. 39