Canon FAXPHONE L75 Setup Instructions for FAXPHONE L75 - Page 3

Load paper., Attach the handset to the machine.

Get Canon FAXPHONE L75 PDF manuals and user guides View all Canon FAXPHONE L75 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Load paper. 1 Insert a stack of paper into the multi-purpose tray 1 (print side facing you and top edge first), then adjust the paper guides A to the width of the paper 2. 2 Attach the multi-purpose tray cover to prevent dust accumulating inside the machine. 1 A 2 2 Attach the handset to the machine. 1 Remove the screws A from the plugs B and insert the plugs into the holes on the handset cradle. B A B 2 Turn the machine so that the left side is facing you and the right side is against a wall. 3 Insert the plugs (with the handset cradle) into the holes on the machine. 4 Use a cross-point screwdriver or a coin to push the screws into the plugs. Make sure the screws are pushed in as far as they will go. NOTE • If the screws are not pushed fully into the plugs the handset cradle will not be securely attached to the machine.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Load paper.
1
Insert a stack of paper into the multi-purpose tray
1
(print side facing you and
top edge first), then adjust the paper guides
A
to the width of the paper
2
.
2
Attach the multi-purpose tray cover to prevent dust accumulating inside the
machine.
Attach the handset to the machine.
1
Remove the screws
A
from the plugs
B
and insert the plugs into the holes on
the handset cradle.
2
Turn the machine so that the left side is facing you and the right side is against a
wall.
3
Insert the plugs (with the handset cradle) into the holes on the machine.
4
Use a cross-point screwdriver or a coin to push the screws into the plugs.
Make sure the screws are pushed in as far as they will go.
1
2
2
A
B
B
A
NOTE
•
If the screws are not pushed fully
into the plugs the handset cradle
will not be securely attached to
the machine.