Canon MF7280 Fax Driver Guide - Page 65

8 Repeat steps 1 to 7 for all other existing Canon fax drivers, if necessary. 9 Restart the computer. 10 Check the fax configuration settings in the [Configuration] sheet (for Windows 98/Me) or [Device Settings] sheet (for 2 Windows NT 4.0/2000/XP/Server 2003), and then reconfigure them if they have been changed. Getting Started NOTE • For the imageRUNNER 400/330 and imageRUNNER 400/330-P1/R1, [Configuration] sheet is displayed regardless of the operating system you are using. • If you are using a shared fax in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC in order to set up the fax configuration automatically or to use the Job Accounting feature. (See "Installing the Canon Driver Information Assist Service," on p. 2-36.) Updating the Alternate Fax Driver (Windows NT 4.0/2000/ XP/Server 2003) If you use a shared fax on a network, and an alternate fax driver is installed on the server, the alternate fax driver is updated simultaneously when you install a new driver with the Installer. To update the alternate fax driver manually without using the Installer, follow the procedure below. Windows NT 4.0 1 On the [Start] menu, point to [Settings] ➞ click [Printers]. 2 In the [Printers] folder, right-click the shared fax driver you want to update ➞ click [Properties]. 3 In the fax properties dialog box, click the [Sharing] tab. Installing the Software 2-43