Canon MP990 Network Guide (MAC) - Page 5

Preparing to Connect My Multifunction To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router. • Access Point Name/Network Name: Also referred to as SSID. A name to identify the specific access point. • Network Key: Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key. A password required to set to prevent unauthorized access to communication. Check your access point or router for the following information, and then write it down. NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer. 5