Canon MultiPASS F80 MultiPASS F80 Setup Sheet - Page 4

Connect the power cord., Install the printhead.

Get Canon MultiPASS F80 PDF manuals and user guides View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Connect the power cord. PLEASE WAIT Approx. 30 seconds PUT IN CARTRIDGE ON/OFF(1sec.) 03 04 07 08 1 Plug the power cord into a socket. 2 When you connect the machine, the Alarm light blinks, and the messages above should appear in the LCD. 3 If nothing appears in the LCD, press [ON/OFF (1 sec.)] to turn on the machine. • If you need to turn off the machine, press [ON/OFF (1 sec.)] for one second. Install the printhead. IMPORTANT • To turn off the machine, be sure to always press [ON/OFF(1sec.)]. This will ensure that the printhead is capped and prevent it from drying up. • If you are not using the machine for a long period of time, we recommend that you print (in black and color) or clean the printhead approximately once a month to maintain the printhead in good working condition. 1 Press [Open] q and lift up the scanning unit w. Then remove the tape A. IMPORTANT w • Do not touch the metal rod or any parts inside the machine. • Do not turn off the machine when opening the scanning unit. q A 2 Remove the printhead from its packaging, then remove the orange protective cap B. B IMPORTANT • Do not touch the electrical contacts C. C Turn over to continue

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Connect the power cord.
Install the printhead.
IMPORTANT
• To turn off the machine, be sure to always press [ON/OFF(1sec.)].This will ensure
that the printhead is capped and prevent it from drying up.
• If you are not using the machine for a long period of time, we recommend that you
print (in black and color) or clean the printhead approximately once a month to
maintain the printhead in good working condition.
1
Press [Open]
q
and lift up the scanning unit
w
. Then remove the tape
A
.
IMPORTANT
• Do not touch the metal rod or any
parts inside the machine.
• Do not turn off the machine when
opening the scanning unit.
2
Remove the printhead from its packaging, then remove the orange protective
cap
B
.
IMPORTANT
•
Do not touch the electrical contacts
C
.
C
B
q
w
A
03
04
07
08
ON/OFF(1sec.)
1
Plug the power
cord into a socket.
2
When you connect
the machine, the
Alarm light blinks,
and the messages
above should
appear in the LCD.
3
If nothing appears in the
LCD, press [ON/OFF (1 sec.)]
to turn on the machine.
•
If you need to turn off the
machine, press [ON/OFF (1 sec.)]
for one second.
Approx. 30 seconds
Turn over to
continue
Turn over to
continue