Canon PIXMA iP4820 iP4820 series Getting Started - Page 13

□ Print Head Alignment Important Information for the Installation B □ Necessary Information for the User Registration H C E F G D Load a sheet of supplied specialty paper for Print Head Alignment (Matte Photo Paper MP-101) in the Rear Tray (B) and click Execute. For details, refer from in "5 Load Paper" on page 15. Make sure that the Paper Output Tray (C) and Output Tray Extension (D) are opened. When the blue and black pattern (E) shown is printed, Print Head Alignment is now complete. In Windows, click Next on the Print Head Alignment screen. • Wait until the pattern printing ends (about 5 minutes). • If the Alarm lamp (orange) (F) flashes, press the RESUME/CANCEL button (G) on the printer to clear the error, then click Next. After the installation is complete, perform Print Head Alignment by referring to "When Printing Becomes Faint or Colors Are Incorrect" in the on-screen manual: Basic Guide. When the serial number is not displayed on the registration screen automatically, input the serial number located inside the printer (as shown in the illustration). • If the power is on, the Print Head Holder will move when the Top Cover (H) is opened. 4 Install the Software 11