Canon PIXMA iP4820 iP4820 series Getting Started - Page 8

31 2A 3 Install the Ink Tanks B C D 1. Remove the orange tape completely. 2. Remove the protective film completely. Hold the ink tank with the orange protective cap (A) pointing up while being careful not to block the Lshape air hole (B). • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied ink tanks. • If the orange tape remains on the L-shape air hole, ink may splash or the printer may not print properly. • If you push the sides of the ink tank with the L-shape air hole blocked, ink may splash. Hold the ink tank by its sides and slowly twist the orange protective cap 90 degrees horizontally to remove it off. Do not push the sides of the ink tank. • Do not touch the inside (C) of the orange protective cap or the open ink port (D). The ink may stain your hands if you touch them.