Canon PowerShot SX700 HS User Guide - Page 129

4 Choose [Auto]. zzPress the buttons or turn the dial to choose [Auto], and then press the button. zzIf you selected [ ], [2], or [ ] as the target device, see "Connecting to WPSCompatible Access Points", starting with step 9 (=127). zzIf you selected a Web service as the destination, see "Connecting to WPSCompatible Access Points", starting with step 12 (=127). • To determine the access point password, check on the access point itself or refer to the user manual. • Up to 16 access points will be displayed. If no access points are detected, choose [Manual Settings] in step 2 to manually set an access point. Follow onscreen instructions and enter an SSID, security settings, and a password. • When you use an access point that you have already connected to for connecting to another device, [*] is displayed for the password in step 3. To use the same password, choose [Next] (either press the buttons or turn the dial) and press the button. Connecting without an Access Point When connecting to a smartphone or printer via Wi-Fi, you can use the camera as an access point (Camera Access Point mode) instead of using another access point. Similarly, no access point is used in camera-to-camera connections (= 132). 1 Access the Wi-Fi menu (= 123). 2 Choose the target device. zzChoose the target device (either press the buttons or turn the dial), and then press the button. zzTo connect to a smartphone, choose [ ]. zzTo connect to a printer, choose [2]. 3 Choose [Add a Device]. zzPress the buttons or turn the dial to choose [Add a Device], and then press the button. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, and M Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 129