Canon PowerShot SX700 HS User Guide - Page 177

Wi-Fi Connection failed • No access points were recognized. Check the access point settings (=124). • A device could not be found. Turn the camera off and on again, and retry the connection. • Check the device you want to connect to and make sure it is ready for connection. Cannot determine access point • The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again. No access points found • Check to make sure that the access point is turned on. • When connecting to an access point manually, make sure that you entered the correct SSID. Incorrect password/Incorrect Wi-Fi security settings • Check the access point security settings (=124). IP address conflict • Reset the IP address so that it does not conflict with another. Disconnected/Receiving failed/Sending failed • You may be in an environment where Wi-Fi signals are obstructed. • Avoid using the camera's Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band. • Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices. • Check the connected device to make sure it is not experiencing errors. Sending failed Memory card error • If the same error message is displayed even when you have inserted a formatted memory card facing the correct way, contact a Canon Customer Support Help Desk. Receiving failed Insufficient space on card • There is not enough free space on the memory card in the target camera to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space. Receiving failed Memory card locked • The write-protect tab of the memory card in the camera to receive the images is set to the locked position. Slide the write-protect tab to the unlocked position. Receiving failed Naming error! • When the highest folder number (999), and the highest image number (9999) have been reached on the receiving camera, images cannot be received. Insufficient space on server • Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space. • Save the images sent via Image Sync (=139) to your computer. Check network settings • Check to make sure your computer can connect to the Internet with the current network settings. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, and M Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 177