Canon SELPHY CP710 SELPHY CP710/CP510 User Guide - Page 31

Loading the Paper Cassette

Page 31 highlights

3 Place the middle cover back to its original position. z After pulling the middle cover down, slide it in the direction of the arrow until it clicks back into place. z Do not close the top cover. Printed or fed paper is coated even when nothing is printed on the paper. Therefore, never reuse the printed or fed paper for printing. Reused paper may stick to the ink sheet, resulting in damage to the printer. „ Loading the Paper Cassette 1 Open the paper cassette compartment cover. 2 Push the paper cassette all the way into the paper cassette slot. Middle cover closed z Be sure the paper is set correctly before pushing the cassette in. z Insert the paper cassette evenly so that it slides over the bottom of the slot entrance. Top cover open •The printer outputs the finished prints into the receptacle onto the top of the printer cassette (top of the middle cover or inside of the top cover). Be sure to close the middle cover and open the top cover so that output can proceed normally. •Do not allow more than 9 sheets to accumulate in the print receptacle. Do not allow too many prints to accumulate. Print receptacle Do not remove the paper cassette while feeding, printing, or ejection is in progress. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

29
Printed or fed paper is coated even when nothing is printed on the paper. Therefore,
never reuse the printed or fed paper for printing. Reused paper may stick to the ink
sheet, resulting in damage to the printer.
Loading the Paper Cassette
Do not remove the paper cassette while feeding, printing, or ejection is in progress.
3
Place the middle cover back to its
original position.
After pulling the middle cover down, slide it in
the direction of the arrow until it clicks back into
place.
Do not close the top cover.
1
Open the paper cassette
compartment cover.
2
Push the paper cassette all
the way into the paper
cassette slot.
Be sure the paper is set correctly
before pushing the cassette in.
Insert the paper cassette evenly so
that it slides over the bottom of the slot
entrance.
The printer outputs the finished prints into
the receptacle onto the top of the printer
cassette (top of the middle cover or inside
of the top cover). Be sure to close the
middle cover and open the top cover so
that output can proceed normally.
Do not allow more than 9 sheets to
accumulate in the print receptacle. Do not
allow too many prints to accumulate.
Top cover open
Middle cover
closed
Print receptacle