Canon SX10IS Software Guide for Windows - Page 43

Basic Functions & Features Contents Things to Remember Mastering the Basics More Advanced Techniques Appendices You can register the start-up image, start-up sound, shutter sound, operation sound and self-timer sound collectively if you select [Setup as a theme]. My Camera Settings in the computer. My Camera Settings registered in the camera. After selecting a My Camera Settings file from the left-hand list, select a My Camera Settings file to replace in the right-hand list and click this button to register it in the camera. HINT Creating My Camera Settings You can create your own original My Camera Settings files using My Camera Maker, a supplied program. To start My Camera Maker, select the [Set individually] tab in the My Camera window and click [Create My Camera data]. * The volume control knob in My Camera Maker sets the volume level in the saved sound file itself. If you think the volume is too loud when replayed on the computer and set it low when you save the file, the sound may not be audible when it is registered to the camera. To adjust the playback volume on the computer, please use the volume controls for the computer or speakers. Use the following specifications to create My Camera Settings files if you are using an alternative program to My Camera Maker. Start-up images: Image Type: JPEG (Baseline JPEG) Data Sampling: 4:2:0 or 4:2:2 Resolution (W x H): 320 x 240 or 512 x 288* * Varies with camera model Start-up Sounds: Type: WAV (Monaural) Bit Rate / Frequency: Type Duration in Seconds 11.025 kHz 8.000 kHz Start-Up Sound 1.0 sec. or less 1.3 sec. or less Operating Sound 0.3 sec. or less 0.4 sec. or less Self-Timer Sound 2.0 sec. or less 2.0 sec. or less Shutter Sound 0.3 sec. or less 0.4 sec. or less 8 bits (11.025 kHz or 8.000 kHz. Set the sound file length to values approximating those in the chart as shown above.) 43