Canon Speedlite 430EX SPEEDLITE 430EX Instruction Manual - Page 29
the slave ID A, B, or C.
View all Canon Speedlite 430EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting the Slave ID Set the slave ID if you use two (A and B) or three (A, B, and C) slave groups. 1 Press the button so that blinks. 2 Press the button to select the slave ID (A, B, or C). 3 Press the button to set the slave ID. Modeling Flash If the camera has a depth-of-field preview button, press it to fire a 1-sec. burst of flashes. This is the modeling flash. You can check the lighting and shadow effects. You can fire the modeling flash for both wireless and normal flash shooting. Do not fire the modeling flash more than 10 consecutive times. If you fire the modeling flash 10 consecutive times, allow the Speedlite to rest for at least 10 min. to avoid overheating and deteriorating the flash head. The modeling flash cannot be fired with the EOS 300/REBEL 2000 and Type-B cameras (p.2). About Slave Group Control Slave group A ID = A ID = A ID = A For example, if you have the slave ID set to for three Speedlites, all three Speedlites will be controlled as if they were one Speedlite in slave group A. 28