Canon VB-R10VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 104
External Device Input Triggered Operation Settings [Event] > [External Device]
View all Canon VB-R10VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
External Device Input Triggered Operation Settings [Event] > [External Device] R11 M641 M741 Operation settings for external device output and for external device input triggered events. External Device Output 1, 2 Set the operation for output to the external device. The camera has two external device outputs. You can set the output for each of them. Note The output for an external device can be switched between active and inactive with [Control for Admin] > [External Device Output] (P. 167). [Operation Mode] Select whether the output terminals are normally open or closed. When [Normally Open] is set, the output terminals remain in the open state (non-conducting circuit) during normal operation, and the terminals close upon an active event and open upon an inactive event. When [Normally Close] is selected, the output terminals remain in the closed state (conducting circuit) during normal operation, and the terminals open upon an active event and close upon an inactive event. Normally Open Active Event Status 1 (The contact is closed.) Inactive Event Status Normally Close Inactive Event Status 0 (The contact is open.) 1 (The contact is closed.) Active Event Status 0 (The contact is open.) [Active Output Format] Select the output format when the external device output is active. [Pulse Output Time (sec)] Enter the output duration time (sec.) when [Active Output Format] is set to [Pulse]. Important When [Active Output Format] is set to [Pulse] and a timer is used (P. 110), a single contact output is controlled when the timer starts. External Device Input [External Device Input Event] Select whether to use the input from an external device, such as a connected sensor, as an event. 104