Canon VB-R10VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 115
Linked Event Operation Examples, Event Linking Method] Set to [OR]
View all Canon VB-R10VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
[OFF Event Operation] If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a linked event (OFF event) is completed. [Ongoing ON Event Operation] Select the operation to be performed when an ON event is triggered. If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the linked event. [Preset] R11 If you specify a preset, the camera angle will automatically move to the preset location when a linked event is triggered. It is necessary to set presets beforehand with [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] (P. 170). Note This cannot be set when [Event Type] is set to [Intelligent Function]. [Video Record] Select whether to record video depending on the linked event. If you select [Enable] and a linked event is triggered, video will be transmitted to the recording destination specified in [Video Record Action] (P. 96). [E-mail Notification] Select whether to send an e-mail notification depending on the linked event. If you select [Enable] and a linked event is triggered, an e-mail notification will be sent. To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 102) beforehand. [External Device Output for ON Event] Select whether external device output (1 or 2) is active or inactive when an ON event is triggered. [External Device Output for OFF Event] Select whether external device output (1 or 2) is active or inactive when an OFF event is triggered. [Audio Playback at ON Event] If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event is triggered. Note This can only be set when [Event Type] is set to [External Device Input] or [Intelligent Function]. [Audio Playback at OFF Event] If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event completes. [Sound Clip] Select the sound clip when [Audio Playback at ON Event] or [Audio Playback at OFF Event] has been set to [Enable]. You must register the sound clip with [Video and Audio] > [Audio Settings] (P. 88) beforehand. [Volume] Enter the volume for the sound clip. Setting Page 4 Linked Event Operation Examples This shows linked event status examples according to the ON/OFF combinations for Event 1 and Event 2. In the examples below, [Event Gap] is 4 seconds and each cell in the graph below represents 1 second. [Event Linking Method] Set to [OR] Only One Event ON Event 1 Event 2 Consolidated state ON OFF ON OFF ON OFF 115