Canon Vixia HF S11 VIXIA HF S11 HD Camcorder Instruction Manual - Page 76
Digital Tele-Converter, About the Full-Screen Display, About the Data Code - hd camcorder
UPC - 013803116403
View all Canon Vixia HF S11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
mode: • All displays on • Regular displays only (removes the histogram and information icons) • All displays off * Pressing DISP. will turn off most of the icons and displays that appear automatically but will not remove onscreen displays that were turned on manually (for example, onscreen markers, the audio level meter or the joystick guide). ** Only displayed in record pause mode, not while recording. About the Full-Screen Display During the playback of movies and photos on a TV or monitor set to fullscreen display, you may notice that the picture on the TV is slightly broader than the picture normally shown on the camcorder's screen. In record pause mode, press DISP. repeatedly until appears on the screen, to display exactly the same picture that can be seen during fullscreen playback. About the Data Code With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the camera setup, etc.). In mode, this information is displayed on the bottom bar and as information icons; in mode, you can select the information to be displayed with the [Data Code] setting. Digital Tele-Converter Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor of approx. 1.7 and record the enlarged image at full HD resolution. Operating modes: 1 Open ( ) the joystick guide. 2 Select ( ) [ Tele-converter] and press . appears and the center of the screen will be enlarged approximately 1.7 times. Tele-converter 76 Video