Canon ZR30MC ZR30 MC Instruction Manual - Page 53
Press the PHOTO button fully down to take the still picture.
View all Canon ZR30MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Using the Full Range of Features • If the subject is unsuitable for autofocus ( 130), the camcorder may not be able to focus, and F may continue to flash white in the display. Continue E to hold the PHOTO button halfway down, then press the FOCUS button and adjust the focus manually with the selector dial. • If you are using manual focus ( 75), the F mark starts as a continuous green mark. Focus with the selector dial. 2. Press the PHOTO button fully down to take the still picture. • The camcorder takes the image immediately, and then records the "photo" to the tape for approximately 6 seconds*. During this time the camcorder also records the sound, and the display shows the still picture. • A counter display appears, and counts up as the camcorder records the picture. F disappears from the display. • The camcorder returns to record pause mode. Notes: • The camcorder automatically returns to record pause mode after recording a still image for approximately 6 seconds*. If you turn the POWER switch to OFF during that time, the camcorder will respond only after recording is complete. • The wireless controller's PHOTO button has no half-way setting. Press the button fully and the camcorder immediately takes the "photo". • Only take "photos" where it is bright enough to see the image in the display. *8 seconds in SP or LP recording mode. 53