Canon ZR30MC ZR30 MC Instruction Manual - Page 66
Audio Recording
View all Canon ZR30MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Audio Recording Selecting the audio mode E ZR30 MC can record sound on a tape in two audio modes - 16-bit and 12-bit. The 16-bit mode produces the higher sound quality (slightly superior to CD) while the 12-bit mode records on two channels (stereo 1), leaving 2 channels free (stereo 2) for you to add new sound at a later date. + , + TAPE CAMERA TAPE PLAY (VCR) ( 37) VCR SET UP AUDIO MODE••12bit To switch to the 16-bit mode, open the menu and select VCR SET UP. Then select AUDIO MODE, set it to "16 bit" and close the menu. • "16 bit" is shown in the display for approximately 4 seconds. Notes: • For details on adding new sound, see p. 91. • For details of playing back a tape that has new sound on stereo 2, see p. 94. • When you record to the ZR30 MC from a camcorder with DV terminal outputs, the audio mode becomes automatically set to 12 bit. • When the recording mode is set to SP or LP mode, the audio mode becomes automatically set to 12 bit. External microphone Using the Full Range of Features For greater creative control over audio recording, you can connect an external microphone to the camcorder via the MIC terminal. When using the MIC terminal, use a microphone with a built-in power supply (condenser microphone). It is possible to connect almost any stereo microphone with a plug diameter of 1/8 inch (3.5 mm), however, their audio levels will be different from that of the builtin microphone. 66