Canon iPF6100 iPF6100 User Manual - Page 684

Problems with the printing quality Image Edges are Blurred or White Banding Occurs Cause The Platen suction is too strong. Corrective Action Set VacuumStrngth to Weakest . (→P.595) The Printhead is set too high. Lower the Printhead . (→P.588) Documents are printed crooked Cause Skew Skew Check Lv. has been set to Loose or Off . Corrective Action Choose Standard in Skew Check Lv. . Width Detection has been set to Off . Choose On in Width Detection . White dots about 1 mm (0.039 in) apart appear on printed documents, in the direction paper is fed. Cause The media type setting is incorrect. Corrective Action After you select the correct media type, clean the parts used in paper feeding (spurs). (→P.162) (→P.124) (→P.644) Parts used in paper feeding (spurs) are soiled. Clean the Spurs. (→P.644) Immediately After Borderless Printing, the Trailing Edge Margin is Soiled During Regular Printing Cause Corrective Action Depending on your printing environment, after borderless printing in which the leading and trailing edge of the roll is cut automatically, any ink adhering to the cutter unit may rub off on the next printed document. Follow these steps to set the Between Pages setting of Drying Time in a range of 30 seconds to 3 minutes before borderless printing. 1.On the Main sheet of the printer driver, click Settings in Media Type . 2.Select the ink drying time in the Between Pages list of Drying Time . 670 Troubleshooting