Canon iPF6100 iPF6100 User Manual - Page 70

Control Panel System Setup Setting Item Warning Buzzer Detect Mismatch Keep Media Size Description, Instructions Set the buzzer. Choose On for the buzzer to sound once for warnings and three times for errors. Choose Warning for notication (display of a warning message) during printing if the paper type specied in the printer menu does not match the paper type in the printer driver. Choose None to continue to print without notication. Choose Pause to have printing paused under these circumstances. In this case, you can continue printing by pressing the Online button. Select On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the trailing margin from being printed. Choose Off to use the printer driver settings instead. Even if the margin setting of the printer driver is smaller than that of the printer driver, text or images will not be cut off. However, this requires longer paper because the actual margin will be equal to the margin setting of the printer driver plus the margin setting of the printer menu. Paper Size Basis Sht Selection Roll Selection 1 Roll Selection 2 TrimEdge Reload If sheet size detection is activated, choose whether ISO A3+ or 13"x19"(Super B) is applied when an intermediate size is detected. If roll size detection is activated, choose whether ISO A3 (297mm) or 300mm Roll is applied when a roll of an intermediate width is detected. If roll size detection is activated, choose whether 10in. (254mm) or JIS B4 (257mm) is applied when a roll of an intermediate width is detected. When Automatic is selected, the leading edge will be cut as needed, taking into account how long the paper has been loaded without being printed. (However, it is not cut if Cutting Mode is set to Manual.) Choose On to cut the leading edge. 56 Printer Parts