Canon iPF755 iPF755 User Manual - Page 73

Control Panel Setting Item GL2 Process- Warning Settings ing Option On-the-Fly Description, Instructions Select On to have any GL2-related warnings displayed. Selecting On will start printing jobs sooner if you are printing only HP RTL print jobs and printing would not start until later. However, images may be incomplete in some cases, so be sure to check the printing results. PageSizeProcess1 Normally, the area available for printing excludes a margin required by the printer, and images are positioned accordingly. Selecting On in this setting eliminates any misalignment of the printing position if the image itself includes a border. PageSizeProcess2 Selecting On will determine the paper size based on the image rendering area. GL2 Set Print Print GL2 settings information. Interface EOP Timer Setup Specify the timeout period before cancellation of print jobs that cannot be received by the printer. TCP/IP IPv4 IPv4 Mode Choose whether the printer IP address is congured automatically or a static IP address is entered manually. Protocol DHCP BOOTP Specify the protocol used to congure the IP address automatically. RARP IPv4 IP Settings Address Subnet Mask Specify the printer network information when using a static IP address. Enter the IP address assigned to the printer, as well as the network subnet mask and default gateway. Default G/W IPv6 IPv6 Support Specify whether to connect via IPv6. IPv6 StlessAddrs Specify whether a IPv6 stateless address is used. DHCPv6 Specify whether DHCPv6 settings are used. NetWare NetWare Specify the NetWare protocol. To apply your changes, choose Register Setting. Frame Type Specify the frame type to use. Print Service Choose the print service. AppleTalk Specify whether to use the AppleTalk protocol. To apply your changes, choose Register Setting. Printer Parts 57