Canon iPF755 iPF755 User Manual - Page 75

System Setup Setting Item Keep Paper Size TrimEdge Reload Rep.P.head Print Nozzle Check Use RemoteUI Reset PaprSetngs Control Panel Description, Instructions Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. Choose Off to give priority to margin settings. The larger value is used if the margin specied in the printer driver does not match the margin in the printer menu Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Specify On to have rolls cut when printing begins after Sleep mode or when the power is restored. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. Choose On to have the printer automatically execute the Advanced Adj. operations after you replace the Printhead. (→P.666) In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer adjust the timing for checks based on the frequency of nozzle use. Choose 1 page to check once per page. Select Warning > On to display warnings if the nozzles clog during printing. Choosing Off prohibits access from RemoteUI. Settings can only be congured from the control panel. Restores settings that you have changed with Media Conguration Tool to the default values. Printer Parts 59