Canon imageCLASS MF3110 Service Manual - Page 94
Cassette Separation Pad
View all Canon imageCLASS MF3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 3ޓ 3) As you remove the bosses on both sides [1], lower the front part of the power supply assembly [2]. Then pull it to remove the power supply assembly. [2] 3.5.3.2 Removing the Cassette Separation Pad 0007-7881 1) Remove the shafts [1] on both sides of the lifting plate. Remove the lifting plate [3] while watching the lifting plate spring [2] carefully. [3] [1] F-3-180 3.5.2.13 Removing the Cassette Pickup Solenoid 0007-7833 1) Place the main unit down on its front face (so that the interior of the main unit is easily visible). 2) Remove the connector [1] on the ECNT board and take out the cable from the cable guide. 3) Remove the screw [2] to remove the cassette pickup solenoid [3], which is located behind the main motor. [3] [2] [1] F-3-182 2) Remove the 2 claws [1] on both sides of the cassette separation pad and lift it up while watching the lifting plate spring [2] carefully. Ensure that the separation pad spring does not get lost. 3) Remove both the plate and the cassette separation pad [3] by sliding them to the left. [2] [3] [2] [1] F-3-181 3.5.3 Cassette Separation Pad [1] F-3-183 3.5.3.1 Removing the Rear of the Cassette 0002-3783 1) Lift the rear of the cassette, and separate the rear from the front. 3-46