Canon imageFORMULA CR-150 imageFORMULA CR-150 / CR-120 Setup and Operation Gui - Page 13

Installation Location 100 mm (3.9") 100 mm (3.9") 100 mm (3.9") 100 mm (3.9") For operation, maintenance, and ventilation, make sure that there is enough space around the scanner, as shown in the illustration above. Avoid placing the scanner in the following places. It may cause a malfunction and adversely affect the scanner or your computer. • Places exposed to direct sunlight If installation in such places is unavoidable, provide a curtain or similar object to shade the scanner. • Places subject to dust and fumes Dust and cigarette fumes adversely affect the components inside the scanner. • Near running water, a heat source, water vapor, or in an area, such as a laboratory exposed to ammonia gas, paint thinner, or other volatile chemicals • Places subject to excessive vibration and shock • Places subject to rapid changes in temperature or humidity Condensation occurring inside the scanner may impair image quality. Place the scanner in a room that is within the following range: Room temperature: 10°C to 32.5°C (50°F to 90.5°F) Relative humidity: 20% to 80% RH Use the recommended operating environment for the ink cartridge when using the imprinter. • Near electronic equipment or heavy equipment that generates a strong magnetic field, such as a speaker, TV, and radio Power Supply • Connect only to a power outlet of the rated voltage and power supply frequency (either 100-120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region). • Make sure that the scanner is connected to an independent power outlet. Do not plug the scanner into an outlet shared with another device. If you use an extension cord, make sure that the extension cord is rated for the current requirements of the scanner. • If you are unsure of anything relating to the power supply, contact your local authorized Canon dealer or service representative for further information. • Never place an object on top of the power cord or step on the power cord. • Never bundle the power cord or wrap the cord around an object, such as a table leg. • Do not tug on the power cord. When you remove the power cord, grip it by the power plug head. • Keep the area around the power outlet free of obstacles. • Do not connect to power outlets with other electrical devices. Also, when using an extension cord, make sure that the extension cord is rated for the current requirements of the scanner. • Disassembling and/or reassembling the AC adapter is extremely dangerous and should not be attempted under any circumstances. • Do not place heavy objects on the AC adapter or power cord. Do not place the adapter or cords in an area where they are likely to be stepped on. • Do not use the power cord while it is bundled. • Never pull directly on the power cord. To remove the plug from the outlet, grasp the plug directly and remove it from the outlet. • Keep the area around the power plug clear of articles so that the power plug can be disconnected in an emergency. • Use only the AC adapter provided with the product. Do not use the scanner's AC adapter with any other product. • If you have any questions about the AC adapter, contact your local authorized Canon dealer or service representative for further information. 13