Canon imageFORMULA DR-7550C Reference Guide - Page 51
Maintenance, Place the new feed roller on the pin.
View all Canon imageFORMULA DR-7550C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2. Open the roller cover. 3. Pull the roller lock lever down. 5. Remove the feed roller. 6. Place the new feed roller on the pin. 3 Maintenance 4. Slide the feed roller to the right, and then pull them towards you. 7. Put the feed roller in place (a), and align the notch in the roller's axle with the shaft on the scanner (b). 43
43
3
Maintenance
2.
Open the roller cover.
3.
Pull the roller lock lever down.
4.
Slide the feed roller to the right, and then pull them
towards you.
5.
Remove the feed roller.
6.
Place the new feed roller on the pin.
7.
Put the feed roller in place (
a
), and align the notch in
the roller’s axle with the shaft on the scanner (
b
).