Canon imagePROGRAF GP-300 Guide for Media Configuration Tool - Page 130
ICC Profile
View all Canon imagePROGRAF GP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Important • The paper sources that can be loaded vary depending on the custom paper. • If you are using a PRO-1000 or PRO-500 model, only the Top Feed can be used as the paper source for color calibration. 3. Load the custom paper in the paper source you selected. Important • Do not load paper that is curled or that has already been printed on. • If a paper source cannot be selected, load the paper into the paper source that is displayed in Paper Source. 4. Select the custom paper set on the printer control panel. 5. Click the OK button. Note • It takes approximately 15 minutes until the calibration target is created. The calibration target is created for the loaded custom paper. 5. ICC Profile sheet 130
Important
•
The paper sources that can be loaded vary depending on the custom paper.
•
•
If you are using a PRO-1000 or PRO-500 model, only the
Top Feed
can be used as the
•
paper source for color calibration.
3.
Load the custom paper in the paper source you selected.
3.
Important
•
Do not load paper that is curled or that has already been printed on.
•
•
If a paper source cannot be selected, load the paper into the paper source that is displayed in
•
Paper Source
.
4.
Select the custom paper set on the printer control panel.
4.
5.
Click the
OK
button.
5.
Note
•
It takes approximately 15 minutes until the calibration target is created.
•
The calibration target is created for the loaded custom paper.
5.
ICC Profile
sheet
5.
130