Canon imagePROGRAF PRO-2000 series User Manual - Page 129

Removing Printed Paper from the Roll Unit Note • By tapping the paper settings display area and then area when setting Take-up mode and setting Wind up after cutting to Enable in advance, you can omit steps 6 and 7 below, because when the paper is cut after printing, the next paper will be automatically taken up after that. However, be careful when using easily damaged roll paper because the roll paper touches the roller when paper is cut. 1. Tap paper settings display area on Home screen of touch screen. Important • If the Home screen does not appear, tap the Home button. 2. Tap area. 3. Tap Feed/cut. 4. Tap Advance or Rewind to advance roll paper a little. With the winding direction set to outward winding, advance the length of one circumference of the roll or more to protect the print side. 5. Tap Cut paper. 129