Canon imagePROGRAF PRO-2000 series User Manual - Page 474

Printing Hanging and Horizontal Banners (Large-Format Printing) A drapery or banner up to 18.0m can be made by enlarging or reducing original documents made on application software. However, there are cases in which an 18.0 meter banner cannot be printed because the application software used has limits on the document size that can be set. The procedure for printing hanging and horizontal banners is as follows: 1. Register custom paper size From Paper Size, use Manage Custom Sizes... to register the paper size that you want to use. 2. Select the paper size In the Print dialog, select a registered custom paper size from the Paper Size list. 3. Select Page Processing from the pop-up menu 4. Select roll paper width Set Roll Paper Width to the width of the roll paper loaded in the printer. 5. Selecting On (Bordered) or On (Borderless) for Fit Roll Paper Width Important • When using the customer paper size and printing the whole sheet without edges, create a paper size with the Non-Printable Area values all set to 0mm in Manage Custom Sizes... from Paper Size, and select On (Bordered) from the Fit Roll Paper Width in Page Processing. 474