Canon imagePROGRAF PRO-2000 series User Manual - Page 392

The printer will not enter standby mode in the following situations. Take action as necessary. • The top cover is open Close the top cover. • The ink tank cover is open Close the ink tank cover. • The print head is not installed Replacing the Print Head • The ink tank is not installed Replacing Ink Tanks • Error appears on touch screen Check the message on the touch screen and take action as necessary. • The ON button and Status lamp never light up, and nothing appears on the touch screen Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet. • No paper is loaded Load paper. (See "Loading and Printing on Rolls.") (See "Loading and Printing on Sheets.") Turning the printer off Important • Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer. 1. Make sure no print jobs are in progress. While the Status lamp is flashing, the printer is running. The color of the lamp indicates the following states. 392