Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 451
Rep.P.head Print, x19Super B
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 451 highlights
iPF830 System Setup Setting Item Detect Mismatch Paper Size Basis Sht Selection 1 Sht Selection 2 Keep Paper Size TrimEdge Reload Rep.P.head Print Nozzle Check User's Guide Menu Settings Description, Instructions Choose Pause to have printing paused under these circumstances. Choose Warning to continue printing after notification. Choose None to continue printing without notification. Choose Hold Job to store jobs with mismatched types and sizes of paper on the printer hard disk, in a print queue awaiting processing. (See "Using the Printer Hard Disk.") ➔P.513 If sheet size detection is activated, choose whether ISO A3+ or 13"x19"(Super B) is applied when a sheet of an intermediate size is detected. If sheet size detection is activated, choose whether ISO B1 or 28"x40" (ANSI F) is applied when a sheet of an intermediate size is detected. Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. Choose Off to give priority to margin settings. The larger value is used if the margin specified in the printer driver does not match the margin in the printer menu. Control Panel Printer Menu Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Specify On to have rolls cut when printing begins after Sleep mode or when the power is restored. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. If you have selected On, the adjustment pattern is printed after replacing the Printhead and Printhead adjustment is performed. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.550 In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer ad- just the timing for checks based on the frequency of noz- zle use. Choose 1 page to check once per page. Choose 10 pages to check once per 10 pages. Choose Off to not execute check. 451 If On is selected in Warning, a warning may be displayed on the Control Panel depending on the result of the nozzle check.