Canon imagePROGRAF iPF8300S iPF8300S Basic Guide No.2 - Page 39

Belt Stopper

Get Canon imagePROGRAF iPF8300S PDF manuals and user guides View all Canon imagePROGRAF iPF8300S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Error Messages Error Message Please calibrate using above paper. Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Hard disk error. File read error. Unknown file. Cause Corrective Action It has become the time for prompting the execution of color calibration. This is displayed when paper is loaded in the printer and Prompt Execution is set to On on the Control Panel menu. Execute color calibration. (→"Using Color Calibration for Color Adjustment," User's Guide) Set Prompt Execution to Off on the Control Panel menu. (→ , Menu Map) The last portion of roll paper was used during a print job. The paper was not advanced because the trailing edge is taped to the roll. Turn off the printer and remove the roll from the printer before restoring power. Fastening tape or the Belt Stopper has not been removed inside the Top Cover. Turn off the printer, open the Top Cover and remove the tape or the Belt Stopper before restoring power. An error requiring service may have occurred. Turn off the printer and wait at least three seconds before restoring the power. If the message is displayed again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. The format of the printer's hard disk is invalid. Press the OK button to start reformatting the hard disk. When formatting is finished, data on the printer hard disk is erased and the printer automatically restarts. Files on the printer's hard disk have become corrupted. Restart the printer. Only the corrupted files will be deleted, and the printer will restart. Data sent to keep the printer up to Check the data. Turn off the printer and wait a while date (such as paper information) is before restoring power, and then resend the data. in the wrong format. You have uploaded firmware for a Check the firmware version. Turn off the printer and different model. wait a while before restoring power, and then resend the firmware. If the message is displayed again, contact your Canon dealer for assistance. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
39
Error Messages
Error Message
Cause
Corrective Action
Hardware error. xxxxxxxx-xxxx
(x represents a letter or number)
The last portion of roll paper was
used during a print job. The paper
was not advanced because the
trailing edge is taped to the roll.
Turn off the printer and remove the roll from the printer
before restoring power.
Fastening tape or the
Belt
Stopper
has not been removed
inside the
Top Cover
.
Turn off the printer, open the
Top Cover
and remove
the tape or the
Belt Stopper
before restoring power.
An error requiring service may
have occurred.
Turn off the printer and wait at least three seconds
before restoring the power.
Hard disk error.
The format of the printer's hard
disk is invalid.
Press the
OK
button to start reformatting the hard
disk. When formatting is finished, data on the printer
hard disk is erased and the printer automatically
restarts.
If the message is displayed again, write down the
error code and message, turn off the printer, and
contact your Canon dealer for assistance.
File read error.
Files on the printer's hard disk
have become corrupted.
Restart the printer. Only the corrupted files will be
deleted, and the printer will restart.
Unknown file.
Data sent to keep the printer up to
date (such as paper information) is
in the wrong format.
Check the data. Turn off the printer and wait a while
before restoring power, and then resend the data.
You have uploaded firmware for a
different model.
Check the firmware version. Turn off the printer and
wait a while before restoring power, and then resend
the firmware.
If the message is displayed again, contact your Canon
dealer for assistance.
Please calibrate using above
paper.
It has become the time for
prompting the execution of color
calibration.
Execute color calibration.
Set
Prompt Execution
to
Off
on the
Control Panel
menu.
(
→
"Using Color Calibration for Color Adjustment,"
User's Guide)
This is displayed when paper is
loaded in the printer and
Prompt
Execution
is set to
On
on the
Control Panel
menu.
(
→
, Menu Map)