Canon imagePROGRAF iPF9400 Basic Guide - Page 141
Messages regarding printing or adjustment, Cannot execute this command. Use other paper.
View all Canon imagePROGRAF iPF9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
iPF9400 Cannot execute this command. Use other paper. Messages regarding printing or adjustment Cannot execute this command. Use other paper 141 Cannot adjust printhead...144 Cannot calibrate...141 Excessive temperature or humidity...141 Please execute common calibration...141 Please commn calibrt using above paper 142 Please calibrate using above paper...142 Borderless printng not possible. Paper stretched or shrank 142 Before borderless printing, move the blue platen switch 142 Borderless printng not possible...137 Blue platen switch is dirty...142 Move the blue platen switch No.xx to the right. (xx represents a number 143 Cannot adjust paper feed...143 Check printed document...143 Cannot execute this command. Use other paper. Cause Paper compatible with color calibration is not loaded. 1. Press the OK button to clear the error. Corrective Action 2. Load paper that is compatible with color calibration. See the Paper Reference Guide. (See Paper Reference Guide.) Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be completed correctly unless the loaded paper matches the settings. Error Message Messages regarding printing or adjustment Cannot calibrate. Cause The paper for printing a test pattern is soiled. Otherwise, you have loaded colored paper. The test pattern was printed too faintly. Direct sunlight or strong lighting may be shining on the printer and causing the sensor to malfunction. Corrective Action Press the OK button to clear the error. Load unused paper compatible with color calibration. (See Paper Reference Guide.) Press the OK button to clear the error. Take steps to remedy faint printing. (See "Printing is faint.") →P.110 Press the OK button to clear the error. Take steps to ensure the printer is not used when exposed to direct sunlight or strong lighting. Excessive temperature or humidity. Cause The temperature or humidity where the printer is installed is out of the acceptable range for operation. Corrective Action Press ▲ or ▼ to select Stop, and then press the OK button to stop printing. Use the printer under suitable environmental conditions. Also note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions, see the Paper Reference Guide. (See Paper Reference Guide.) Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibration. However, note that correct adjustment may not be possible. Please execute common calibration. Cause There is not even one Common calibration execution result. Basic Guide 141 Corrective Action Execute Common calibration.