Canon imagePROGRAF iPF9400 Basic Guide - Page 151

iPF9400 Error Messages Before borderless printing, move the blue platen switch 142 Blue platen switch is dirty...142 Borderless printng not possible...137 Borderless printng not possible. Paper stretched or shrank 142 Calibration There is a problem with the multi-sensor 150 Cannot adjust paper feed...143 Cannot adjust printhead...144 Cannot calibrate...141 Cannot cut this paper...135 Cannot detect papr ...135 Cannot execute this command. Use other paper 141 Cannot feed paper...135 Cannot recognize print head x. (x is L, R, or not displayed 145 Check printed document...143 Close Ink Tank Cover ...139 End of paper feed...136 ERROR Exxx-xxxx (x represents a letter or number 149 Excessive temperature or humidity...141 Execute printhead cleaning...145 File read error...147 GARO Wxxxx (x represents a number) ...149 Hard disk error...147 Hardware error. xxxxxxxx-xxxx (x represents a letter or number 149 Error Message Ink insufficient...139 Ink tank is empty...140 Insufficient paper for job ...132 Error Messages Mail box full. Delete unwanted data ...147 Mail box full. Now printing without saving data 147 Mail box nearly full...147 Maint. cart. The level is low ...146 Maintenance cartridge full...146 Maintenance cartridge problem...146 Maximum jobs stored...147 Media take-up unit ready...137 MediaType Mismatch ...129 Move the blue platen switch No.xx to the right. (xx represents a number 143 Multi-sensor error ...150 No ink left...139 No ink tank loaded...140 No Maintenance Cartridge capacity...146 No maintenance cartridge...146 No sheets...134 Not much ink is left...140 Paper jam...134 Paper loaded askew...135 Paper mismatch ...129 Paper position not suitable for borderless printing 137 Paper size not detected...131 PaprWidth Mismatch ...131 Parts replacement time has passed...150 PHeads: wrong pos...144 Please calibrate using above paper...142 151 Please commn calibrt using above paper 142 Please execute common calibration...141 Basic Guide