Canon imageRUNNER 1025 Series Quick Start Guide - Page 14

2 Set Up the Machine Set Date and Time Before using the machine, you MUST set the current date and time. The date and time set are used as a standard for timer settings functions. ● Information About the Keys ‒ Use - [numeric keys] to enter numbers. ‒ Press [ ] or [ ] to move the cursor position. ‒ Press [OK] to set the entry and to proceed to the next screen. ‒ Press [Clear] to delete entire entry. ● The display returns to the standby mode: The machine may enter the standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. ● The display turned off: The machine may enter the sleep mode while you are setting it up. Press [Power] to turn the machine back ON and continue the setup. 1 Press [Additional Functions]. 2 Press [ ] or [ ] to select , then press [OK]. ADD.FUNCTIONS 6.TIMER SETTINGS 3 Confirm that is displayed, then press [OK]. TIMER SETTINGS 1.DATE&TIME SETTING 4 Use - [numeric keys] to enter the date (month/day/year) and time (in 24-hour/military time format), then press [OK]. Ex. DATE&TIME SETTING 06/30 '08 15:50 Enter the month, day and year using two digits (including zeros). Enter the time in 24-hour notation, as four digits (including zeros) without a space. Examples: May 6 → 0506 2008 → 08 9:05 a.m. → 0905 4:18 p.m. → 1618 If you make a mistake when entering values, press [ ] or [ ] to move the cursor to the number to be corrected and overwrite it. 12