Casio CW-L300 Startup Guide - Page 27

6. Press SET to start printing. • To interrupt printing part way through, press ESC. Important! • Never turn off the printer while it is performing a print operation. • Never open the cassette cover while the printer is performing a print operation. • Do not touch the tape coming out of the printer until it is cut automatically or until printing is complete. Before printing, make sure that the tape cartridge has enough tape left to finish the print operation. If the tape cartridge runs out of tape during a print operation, press ESC to cancel the print operation. • Make sure that cut tape does not pile up in the area around the tape outlet. Tape building up around the tape outlet can cause the outlet to become blocked, causing a tape jam and malfunction of the printer. • Consecutive printing of text that contains large areas of black cause the printing to stop and the message " NOW PRINTING " to appear on the display. This indicates that the printer is overheated. If this happens, just stand by and printing will resume as soon as the printer returns to normal temperature. • If the message " NOW PRINTING " appears and printing stops frequently, try making the print density lighter. See page 55 of the User's Guide. ■ To affix a tape label to a surface 1. If necessary, use a pair of scissor to trim the tape to the size and shape you want. 2. Peel off the backing of the label and affix it to the surface you want. ■ When using the CONT HALF CUT or FULL+HALF CUT tape cut mode Carefully twist the tape at the position where the tape is half-cut, and peel off the backing paper. Half cut ■ When using the FULL CUT tape cut mode Bend a corner of the tape and peel off the backing paper. • Note that pasting a label onto a surface can cause adhesive to remain on the surface when you remove the label. Important! Do not affix tape labels to objects and in the locations described below. • Locations exposed to direct sunlight or rain • On the skin of a person or animal • On property belonging to others, utility poles, etc. • In parks, train stations, or other public places. Incompatible Surfaces The label tape may not adhere properly to the following types of surfaces. • Surfaces that are rough • Surfaces that are wet, oily, dusty, etc. • Surfaces made of special plastics (silicon, PP, etc.) 25 E