Casio EX-FS10GY Owners Manual - Page 170
Problem, Possible Cause and Recommended Action, 3You may be trying to use Auto Focus or
View all Casio EX-FS10GY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Problem Possible Cause and Recommended Action The subject is out of focus in the recorded image. The image may not be focused properly. When composing the image, make sure the subject is located inside the focus frame. The flash does not fire. 1)If ? (Flash Off) is selected as the flash mode, change to another mode (page 42). 2)If the battery is low, charge it (page 16). 3)If a BEST SHOT scene that uses ? (Flash Off) is selected, change to a different flash mode (page 42) or select a different BEST SHOT scene (page 63). 4)If Lag Correction is turned on while shooting single shots, change the "Lag Correction" setting to "Ó Off" (page 40). The ? (Flash Off) icon flashes red on the monitor screen and the flash does not fire. The flash unit may be malfunctioning. Contact a CASIO service center or your original retailer. Note that though the flash will not fire, you still can use the camera for non-flash shots. Camera powers down during Selftimer countdown. The battery may be low. Charge the battery. The monitor screen image is out of focus. 1)You may be using Manual Focus and have not focused the image. Focus the image (page 79). 2)You may be using ´ (Macro) for scenery or portraits. Use Auto Focus for scenery and portrait shots (page 79). 3)You may be trying to use Auto Focus or ) (Infinity) when shooting a close-up shot. Use the ´ (Macro) for close ups (page 79). There is digital noise in images. 1)Sensitivity may have been increased automatically for a dark subject, which increases the chance of digital noise. Use a light or some other means to illuminate the subject. 2)You may be attempting to shoot in a dark location with ? (Flash Off) selected, which can increase digital noise and make images appear coarse. In this case, turn on flash (page 42) or use lights for illumination. A recorded image was not saved. 1)Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows , charge the battery as soon as possible (page 18). 2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete. 170 Appendix